Key Registration

This function allows the registration of additional Key Codes for Transponder Keys (Master/Sub Keys) using a Registered Master Key. The following screens show how to perform Key Registration.

HINT:
This function requires the use of one Registered Master Key. The use of a Sub Key will NOT complete Key Registration.





1. From the "KEY CODE UTILITY" menu (Screen A), select [1: KEY REGISTRATION].





2. Confirm the instruction on Screen B and press the (ENTER) key.





3. From the KEY SELECTION" menu (Screen C), select the Transponder Key to be registered and press the (ENTER) key.

NOTE:
Do not register a SUB KEY as a MASTER KEY. The SUB KEY is typically left with an attendant when the vehicle is parked. A Registered Master Key allows the user to add/erase transponder keys.





4. From "KEY SELECTION" (Screen D), confirm the type of Transponder Key to be registered and press the (ENTER) key.





5. After pressing the (YES) key, remove the Registered Master Key from the Ignition Cylinder within 20 seconds. After removing the key, press the (ENTER) key.





6. Insert the New Transponder Key into the Ignition Cylinder within 10 seconds and press the (ENTER) key.

HINT:
Look at the Security Indicator Light.
It will begin to flash as the New Transponder Key is inserted.





7. The registration of the New Transponder Key will be completed in approximately 60 seconds.

HINT:
The Security Indicator continues to flash during registration.





8. Screen H will be shown at completion of registration. Confirm the Security Indicator turns OFF and press the (ENTER) key.

HINT:
The Security Indicator will stop flashing when Key Registration is complete.





9. Insert the New Registered Master Key into the ignition Cylinder and turn to the ON position and press the (ENTER) key.