Sunroof / Moonroof: Adjustments

SLIDING ROOF




1. REMOVE SLIDING ROOF GARNISHES
Before making adjustment, remove the left and right sliding roof garnishes.

HINT: After adjustment, reinstall the sliding roof garnishes.




2. ADJUST LEVEL DIFFERENCE
Adjust by increasing or decreasing the number of shims between the bracket and sliding roof.




3. ADJUST FORWARD OR REARWARD
a. Adjust by loosening the sliding roof installation nuts, and move the sliding roof bracket forwards and backwards.
b. When the front or rear alignment is not correct, remove the glass and adjust the drive rail.





c. Using a screwdriver, slide the link forwards or backwards to align the marks, as shown in the illustration.

HINT: Tape the screwdriver tip before use.







4. ADJUST RIGHT OR LEFT
Adjust by loosening the sliding roof glass installation nuts, and move the sliding to the left and right.




5. ADJUST CLEARANCE
(Difference in left and right clearance)




Adjust by loosening the sliding roof installation nuts and read-just the sliding roof to the proper position.