Compressor HVAC: Service and Repair

COMPONENTS

REMOVAL

1. RUN ENGINE AT IDLE SPEED WITH A/C ON FOR APPROX. 10 MINUTES
2. STOP THE ENGINE
3. DISCONNECT NEGATIVE (-) TERMINAL CABLE FROM BATTERY
4. DISCHARGE REFRIGERANT FROM REFRIGERATION SYSTEM
5. REMOVE ENGINE UNDER COVER
6. DISCONNECT DISCHARGE HOSE AND SUCTION HOSE FROM COMPRESSOR

NOTE: Cap the open fittings immediately to keep moisture or dirt out of the system.

7. REMOVE DRIVE BELT
8. REMOVE COMPRESSOR
a. Disconnect the connector.
b. Remove the 3 bolts and compressor.

INSTALLATION
Installation is in the reverse order of removal.