Power Steering Pump

SERVICE SPECIFICATIONS
Oil Clearance Between Pump Shaft And Bushing:
Standard 0.01-0.03 mm (0.0004-0.0012 inch)
Maximum 0.07 mm (0.0028 inch)
Vane Plate
Height:
Minimum 8.1 mm (0.339 inch)
Thickness:
Minimum 1.797 mm (0.0707 inch)
Length:
Minimum 14.988 mm (0.5901 inch)
Clearance Between The Rotor Groove And Plate:
Maximum 0.035 mm (0.0014 inch)
Vane Plate And Pump Rotor Groove Clearance:
Maximum 0.03 mm (0.0012 inch)
Vane Plate Length:
Pump Rotor And Cam Ring Mark:
None 14.999-15.001 mm (0.59051-0.59059 inch)
1 14.997-14.999 mm (0.59043-0.59051 inch)
2 14.995-14.997 mm (0.59035-0.59043 inch)
3 14.993-14.995 mm (0.59027-0.59035 inch)
4 14.991-14.993 mm (0.59020-0.59027 inch)
Spring Free Length:
Minimum 36 mm (1.272 inch)
Vane Pump Rotating Torque:
Maximum 0.3 Nm (2.4 inch lbs.)

TORQUE SPECIFICATIONS
Union Bolt To Pressure Feed Tube 52 Nm (38 ft. lbs.)
Drive Belt Adjusting Bolt 43 Nm (32 ft. lbs.)
Pump Assembly Set Bolt 43 Nm (32 ft. lbs.)
Bracket Set Bolt 43 Nm (32 ft. lbs.)
Vane Pump Pulley Set Bolt 43 Nm (32 ft. lbs.)
Union Bolt To Pressure Feed No.2 Tube 69 Nm (51 ft. lbs.)
Suction Port Union Set Bolt 13 Nm (108 inch lbs.)
Pressure Port Union 69 Nm (51 ft. lbs.)