Wiper and Washer Systems: Testing and Inspection

INSPECTION







INSPECT WASHER NOZZLE
a. While operating the washer, check that the washer fluid hits the windshield and the upsurge area within the shaded areas.

USA:
A: Approx. 150 mm (5.91 in.)
B: Approx. 50 mm (1.97 in.)
C: Approx. 0 - 50 mm (0 - 5.91 in.)
D: Approx. 415 mm (16.34 in.)
E: Approx. 210 mm (8.28 in.)
F: Approx. 220 mm (8.66 in.)
G: Approx. 250 mm (9.84 in.)
H: Approx. 260 mm (10.24 in.)
I: Approx. 365 mm (14.37 in.)

CANADA:
A: Approx. 150 mm (5.91 in.)
B: Approx. 0 - 50 mm (0 - 5.91 in.)
C: Approx. 190 mm (7.48 in.)
D: Approx. 450 mm (17.72 in.)
E: Approx. 165 mm (6.50 in.)
F: Approx. 465 mm (18.31 in.)
G: Approx. 210 mm (8.27 in.)
H: Approx. 80 mm (3.15 in.)
I: Approx. 55 mm (2.17 in.)
J: Approx. 300 mm (11.81 in.)
K: Approx. 490 mm (19.29 in.)

b. Check if the lower point where the washer fluid hits the windshield is within the range of the wiping pattern (the area of the glass which the wiper blades wipe).