Steering Gear: Specifications

SERVICE SPECIFICATIONS
Steering Rack Runout:
Maximum 0.30 mm (0.0118 inch)
Bushing Inner Diameter:
Maximum 27.75 mm (1.0925 inch)
Control Valve Shaft Outer Diameter:
Maximum 27.75 mm (1.0925 inch)
Total Preload 0.8-1.3 Nm (6.9-11.3 inch lbs.)

TORQUE SPECIFICATIONS
Pressure Feed Tube And Return To Control Valve Housing:
With Special Service Tool (SST) 36 Nm (26 ft. lbs.)
Less SST 44 Nm (32 ft. lbs.)
Turn Pressure Tube Set Union Bolt 29 Nm (22 ft. lbs.)
Turn Pressure Tube:
With SST 23 Nm (17 ft. lbs.)
Less SST 29 Nm (22 ft. lbs.)
Rack End:
With SST 60 Nm (44 ft. lbs.)
Less SST 83 Nm (61 ft. lbs.)
Rack Guide Spring Cap Lock Nut:
With SST 32 Nm (24 ft. lbs.)
Less SST 44 Nm (33 ft. lbs.)
Rack Housing Cap Lock Nut 69 Nm (51 ft. lbs.)
Lock Nut 12 Nm (108 inch lbs.)
Rack Housing No.1 Bracket Set Bolt 61 Nm (45 ft. lbs.)
Rack Guide Spring Cap 25 Nm (18 ft. lbs.)