Power Steering Pump
SERVICE SPECIFICATIONSVane Pump Rotating Torque:
Maximum 0.3 Nm (2.4 inch lbs.)
Oil Clearance Between Pump Shaft And Bushing:
Standard 0.03 - 0.05 mm (0.0012 - 0.0020 inch)
Maximum 0.07 mm (0.0028 inch)
Vane Plate:
Minimum Height 8.6 mm (0.339 inch)
Minimum Thickness 1.397 mm (0.0550 inch)
Minimum Length 14.991 mm (0.5902 inch)
Clearance Between The Rotor Groove And Plate:
Maximum 0.035 mm (0.0014 inch)
Vane Plate Length:
Pump Rotor And Cam Ring Mark:
None 14.999 - 15.001 mm (0.59051 - 0.59059 inch)
1 14.997 - 14.999 mm (0.59043 - 0.59051 inch)
2 14.995 - 14.997 mm (0.59035 - 0.59043 inch)
3 14.993 - 14.995 mm (0.59027 - 0.59035 inch)
4 14.991 - 14.993 mm (0.59020 - 0.59027 inch)
Spring Free Length:
Minimum 32.3 mm (1.272 inch)
TORQUE SPECIFICATIONS
Pressure Feed Tube To Control Valve Housing:
With Special Service Tool (SST) 32 Nm (24 ft. lbs.)
Less SST 25 Nm (18 ft. lbs.)
Clamp Plate Set Nut 7.8 Nm (69 inch lbs.)
PS Vane Pump Set Bolt (A Bolt):
With SST 29 Nm (21 ft. lbs.)
Less SST 43 Nm (32 ft. lbs.)
PS Vane Pump Set Bolt (B Bolt) 43 Nm (32 ft. lbs.)
Oil Pressure Switch To Union Bolt 21 Nm (15 ft. lbs.)
Union Bolt To Pressure Feed Tube 52 Nm (38 ft. lbs.)
Vane Pump Pulley Set Nut 43 Nm (32 ft. lbs.)
Front Bracket To Rear Bracket 43 Nm (32 ft. lbs.)
Suction Port Union Set Bolt 13 Nm (108 inch lbs.)
Pressure Port Union 83 Nm (62 ft. lbs.)
Rear Housing Set Bolt 24 Nm (17 ft. lbs.)