Removal and Installation

COMPONENTS

REMOVAL

CAUTION: Do not smoke or work near an open flame when working on the fuel pump.

1. REMOVE FUEL TANK




2. REMOVE FUEL PUMP BRACKET ASSEMBLY FROM FUEL TANK
a. Disconnect the fuel pump connector from the clamp.
b. Remove the 8 bolts.

Torque: 3.4 Nm (35 kg.cm, 30 in.lb)




c. Pull out the pump bracket assembly.
d. Remove the gasket from the pump bracket.

HINT: At the time of installation, please refer to the following items.

Install a new gasket to the pump bracket.

INSTALLATION
Installation is in the reverse order of removal.