Crankshaft, Engine

Crankshaft Thrust Clearance
Standard 0.020 - 0.220 mm
Maximum 0.30 mm
Thrust Washer Thickness 2.440 - 2.490 mm

Bearing Inside Diameter (From Front Side)
2.7L (3RZ-FE)
No.1 (RH) 38.025 - 38.045 mm
No.2 (LH) 37.525 - 37.545 mm

Main Journal Diameter (From Front Side)
2.7L (3RZ-FE)
No.1 (RH) 37.969 - 38.985 mm
No.2 (LH) 37.449 - 37.465 mm

Maximum Circle Runout 0.03 mm

Main Journal Diameter
STD
No.3 59.981 - 59.994 mm
Others 59.987 - 60.000 mm
U/S 0.25
No.3 59.740 - 59.750 mm
Others 59.745 - 59.755 mm

Crank Pin Diameter
STD 52.987 - 53.000 mm
U/S 0.25 52.745 - 52.755 mm

Maximum Taper Out-Of-Round 0.005 mm