Power Window Motor: Service and Repair

HINT: When performing the operation described below, it is necessary to reset the power window (Initial setting of limit switch).

- When the window regulator is separated from the power window motor.
- When the window regulator is operated with the door glass not installed.

HOW TO RESET DRIVER AND PASSENGER WINDOW MOTOR
a. Remove the power window motor from the regulator.
b. Connect the power window motor connector to the vehicle side wire harness.
c. Rotating the power window motor to up side more than 6 turns or more than 4 secs.
d. Install the power window motor to the regulator.

CHECK POWER WINDOW FUNCTION

HINT: After reset operation, because the jam protection function dose not work, after repeating AUTO UP <- -> AUTO DOWN, inspect the function.