Camshaft Position Sensor: Service and Repair
CAMSHAFT POSITION SENSOR
COMPONENTS
REMOVAL
1. REMOVE NO.2 TIMING BELT COVER
2. REMOVE CAMSHAFT POSITION SENSOR
a. Disconnect the camshaft position sensor connector.
b. Remove the bolts and camshaft position sensor.
c. Disconnect the cord clamp from the No.3 timing belt cover.
INSTALLATION
1. INSTALL CAMSHAFT POSITION SENSOR
a. Connect the cord clamp to the timing belt cover.
b. Install the camshaft position sensor with bolt.
Torque: 7.8 Nm (80 kg.cm, 69 in.lb)
c. Connect the camshaft position sensor connector.
2. INSTALL NO.2 TIMING BELT COVER