Keyless Entry: Description and Operation

In this system, the door control receiver receives the weak radio wave transmitted from the transmitter inside the ignition SW, and controls remotely the lock/unlock of all the doors and the luggage door, through the communication control of the body ECU.

1. NORMAL OPERATION
* Lock operation
When the lock SW of the transmitter is pushed, all the doors are locked. The answer back buzzer will beep once and the tail lamps will flash once synchronously.
* Unlock operation
When the unlock SW of the transmitter is pushed once, only the driver's side door is unlocked. The answer back buzzer will beep twice and the tail lamps will flash twice synchronously. When the unlock SW is pushed again within 3 seconds, all the doors are unlocked. After the unlock button is pressed the 2nd time, there will be 2 quick beeps (Answer back buzzer) and 2 quick flashes the tail lamps.
* Luggage door unlock operation
When the luggage door unlock SW is pushed for a second, the luggage door will open. The answer back buzzer will make a single, long beep.

2. AUTO LOCK FUNCTION
When the doors are unlocked by the transmitter, but are not actually opened within 30 seconds, all the doors will be locked again automatically.

3. PANIC MODE FUNCTION
When the panic SW of the transmitter is pushed, the horn comes ON, and the headlight and taillight flashes.

4. REPEAT FUNCTION
In case an appropriate lock detection signal is not received after outputting a lock signal when pushing the lock button (Transmitter), the body ECU output the lock signal again.