Overhaul
DISASSEMBLY1. REMOVE NO. 1 INSTRUMENT PANEL
a. Remove the 3 screws.
b. Using a screwdriver, remove the No.1 instrument panel.
HINT: Tape the screwdriver tip before use.
2. REMOVE SIDE DEFROSTER NOZZLES
3. REMOVE NO. 1 DEFROSTER NOZZLE GARNISH
4. REMOVE NO. 1 INSTRUMENT PANEL PINS
5. REMOVE NO. 1 SIDE DEFROSTER NOZZLE DUCT
6. REMOVE NO. 2 SIDE DEFROSTER NOZZLE DUCT
7. REMOVE DEFROSTER NOZZLE
8. REMOVE NO. 5 HEATER TO REGISTER DUCT
9. REMOVE NO. 4 HEATER TO REGISTER DUCT
10. REMOVE METER HOOD SET BRACKETS
11. REMOVE CENTER BRACKET
12. REMOVE INSTRUMENT PANEL WIRE HARNESS
13. REMOVE FRONT PASSENGER AIRBAG ASSEMBLY
Remove the 6 nuts and front passenger airbag assembly as shown in the illustration.
CAUTION:
- Do not store the front passenger airbag assembly with the airbag deployment side facing down.
- Never disassemble the front passenger airbag assembly.
NOTE: When removing the front passenger airbag assembly, take care not to damage the wire harness.
14. REMOVE NO. 1 INSTRUMENT PANEL SAFETY PAD
15. REMOVE NO. 3 REGISTER
REASSEMBLY
Reassembly is in the reverse order of disassembly.