Wheel Bearing Dust Deflector - Ticking Noise
SUSPENSIONSU001-01
July 13, 2001
Title:
DUST DEFLECTOR NOISE
Models:
'00 - '01 Avalon, Camry, Sienna & Solara
Introduction
Some of the vehicles below may experience a ticking noise from the front wheel bearing dust deflector due to looseness of the dust deflector. To improve this condition, production parts have been changed.
Applicable Vehicles
^ 2000 - 2001 model year Avalon, Camry (NAP), Sienna and Solara vehicles.
^ 2000 model year Camry (CBU) vehicles.
Production Change Information
Warranty Information
Applicable Warranty*:
This repair is covered under the Toyota Powertrain Warranty. This warranty is in effect for 60 months or 60,000 miles, whichever occurs first, from the vehicle's in-service date.
* Warranty application is limited to correction of a problem based upon a customer's specific complaint.
Parts Information
Repair Procedure
REMOVAL
1. Remove the front axle hub (please refer to Repair Manual section SA).
2. Remove the dust deflector.
INSTALLATION
1. Using the SSTs and a hammer, install a new dust deflector. SST P/N 09316-60011 (09316-00011, 09316-00041), 09608-32010.
2. Install the front axle hub in the reverse order of disassembly.
NOTE:
Align the holes for the ABS speed sensor in the dust deflector and steering knuckle.