Canada - Interior - Center Cluster Finish Panel Removal

Bulletin
0595

Issue Date
1997-07-01

Reference
BC-97-009

Model
Camry

Year Range
1997 ~ 2001

Market
Canada

Component
BC

Subject:
CENTRE CLUSTER FINISH PANEL REMOVAL

The following procedure should be used for removal and installation of the Centre Cluster Finish Panel on the 1997 M/Y Camry.

NOTE: This procedure is a revision of Step #10 on Page BO-59 of the Camry Repair Manual Pub. No. RM503U2.

Required Tools and Materials:
- Snap-On Pick (P/N 3ASH90A)
- Fabric Tape

Removal Procedure:





- To protect console, tape all console edges surrounding the centre cluster finish panel with fabric tape.





- Using Snap-On Pick, gently pry the centre cluster finish panel from I.P. in a counter-clockwise direction beginning with lower right clip #1.

Installation Procedure:





- Install centre cluster finish panel by pressing firmly in a clockwise direction beginning with lower left clip #6.
- Remove fabric tape.

NOTE:
Issue of this Technical Service Bulletin is to ensure that proper repair information is available. IT DOES NOT CONSTITUTE AN AUTHORIZATION FOR REPAIR. Normal provisions of the formal warranty policy, as applicable, will apply.