Disassembly and Reassembly
DISASSEMBLY1. REMOVE AIR INLET SERVOMOTOR
a. Remove the 4 screws and servomotor with link.
b. Using a screwdriver, release the claw and remove the link.
HINT: Tape the screwdriver tip before use.
2. 1MZ-FE manual A/C only:
REMOVE A/C AMPLIFIER
3. REMOVE BLOWER MOTOR
Remove the 3 screws and blower motor.
4. Manual A/C only:
REMOVE BLOWER RESISTOR
Remove the 2 screws and blower resistor.
5. Auto A/C only:
REMOVE BLOWER LO-RESISTOR
Remove the 2 screws and blower lo-resistor.
REASSEMBLY
1. Manual A/C:
INSTALL BLOWER RESISTOR
Install the blower resistor with the 2 screws.
2. Auto A/C:
INSTALL BLOWER LO-RESISTOR
Install the blower lo-resistor with the 2 screws.
3. INSTALL BLOWER MOTOR
Install the blower motor with the 3 screws.
4. 1MZ-FE manual A/C only:
INSTALL A/C AMPLIFIER
5. INSTALL AIR INLET SERVOMOTOR
a. Install the link to the servomotor.
b. Install the servomotor with the 4 screws.