Connecting Rod Bolt/Nut

Connecting Rod Bolts
Standard Diameter 7.2 - 7.3 mm (0.284 - 0.287 inch)
Minimum Diameter 7.0 mm (0.276 inch)

Tightening Torque
Step 1 24.5 Nm (250 kgf-cm, 18 ft. lbs.)
Step 2 Turn 90°


Apply a light coat of engine oil on the threads and under the heads of the connecting rod cap bolts.

Install and alternately tighten the 2 connecting rod cap bolts in several passes.