Body - General Maintenance

INSPECTION

1. TIGHTEN BOLTS AND NUTS ON CHASSIS AND BODY




a. Tighten these parts:
- Front seat mount bolts
Torque: 37 N.m (375 kgf.cm, 27 ft.lbf)

b. Under Severe Conditions:
In addition to the above maintenance items, check for loose or missing nuts and bolts on the following:
- Steering system
- Drive train
- Suspension system
- Fuel tank mounts
- Engine mounts, etc.

2. FINAL INSPECTION
a. Check the operation of the body parts:
- Hood:
Auxiliary catch operate properly
Hood locks securely when closed
- Front and rear doors:
Door lock operates properly Doors close properly
- Luggage compartment door and back door:
Door lock operates properly
- Seats;
Seat adjusts easily and locks securely in any position
Front seat back locks securely in any position Folding-down rear seat backs lock securely

b. Road test:
- Check the engine and chassis for abnormal noises.
- Check that the vehicle does not wander or pull to one side.
- Check that the brake work properly and do not drag.

c. Be sure to deliver a clean car. Especially check:
- Steering wheel
- Shift lever knob
- All switch knobs
- Door handles Seats