C1235

CIRCUIT DESCRIPTION
The speed sensor detects wheel speed and sends the appropriate signals to the ECU. These signals are used to control the ABS system. The front and rear rotors each have 48 serrations.
When the rotors rotate, the magnetic field emitted by the permanent magnet in the speed sensor generates an AC voltage. Since the frequency of this AC voltage changes in direct proportion to the speed of the rotor, the frequency is used by the ECU to detect the speed of each wheel.




DETECTING CONDITIONS

HINT: DTC No C1235/35 is for the right front speed sensor.




WIRING DIAGRAM

Step 1:

Step 2(part 1 Of 2):

Step 2(part 2 Of 2):

Step 3:

Step 4:

Step 5:

Step 6(part 1 Of 2):

INSPECTION PROCEDURE

HINT: Start the inspection from step 1 in case of using the TOYOTA hand-held tester and start from step 2 in case of not using the TOYOTA hand-held tester