Connecting Rod Bolt/Nut

Connecting Rod Bolts
Standard Diameter 6.6 - 6.7 mm (0.260 - 0.264 inch)
Minimum Diameter 6.4 mm (0.252 inch)


Tightening Torque:
1st 20 N-m (204 kgf-cm, 15 ft-lbf)
2nd Turn 90°

Apply a light coat of engine oil on the threads and under the heads of the connecting rod cap bolts.

Install and alternately tighten the 2 connecting rod cap bolts in several passes.