Air/Fuel Ratio Sensor
AIR-FUEL RATIO (A/F) SENSOR (California)INSPECTION
1. INSPECT HEATER RESISTANCE OF A/F SENSOR
a. Disconnect the A/F sensor connector.
b. Using an ohmmeter, measure the resistance between terminals +B and HT.
Resistance: 0.8 - 1.4 Ohms at 20 °C (68 °F)
If the resistance is not as specified, replace the sensor.
Torque: 44 Nm (450 kg cm, 32 ft.lb)
c. Reconnect the A/F sensor connector.
2. INSPECT OPERATION OF A/F SENSOR