Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 2000 >> RAV4 2-Door 2WD L4-2.0L (3S-FE) >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Oxygen Sensor >> Testing and Inspection >> Heated Oxygen Sensor
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Heated Oxygen Sensor

HEATED OXYGEN SENSOR (Bank 1 Sensor 1/Except Calif.)

INSPECTION

1. INSPECT HEATER RESISTANCE OF HEATED OXYGEN SENSOR
a. Disconnect the oxygen sensor connector.




b. Using an ohmmeter, measure the resistance between terminals +B and HT.

Resistance: 11 - 16 Ohms at 20 °C (68 °F)

If the resistance is not as specified, replace the sensor.

Torque: 44 Nm (450 kg.cm, 32 ft.lb)

c. Reconnect the oxygen sensor connector.

2. INSPECT OPERATION OF HEATED OXYGEN SENSOR
pro multis · About Operation CHARM