Service Specifications

Counter Shaft:
Starting Torque With Spring Tension Gauge 1.2 - 2.0 kgf (2.6 - 4.4 lbs.)
Starting Torque With Torque Gauge (Hexagon Nut Side)
New Bearing 0.6 - 1.0 Nm (5.2 - 8.7 inch lbs.)
Reused Bearing 0.3 - 0.5 Nm (2.6 - 4.3 inch lbs.)

Planetary Sun Gear Bushing Inside Diameter:
Standard 29.800 - 29.825 mm (1.1732 - 1.1742 inch)
Maximum 29.870 mm (1.1760 inch)


Counter Drive Gear:
Counter Drive Gear Preload
New Bearing 0.3 - 0.7 Nm (2.1 - 6.1 inch lbs.)
Reused Bearing 0.3 - 0.4 Nm (2.1 - 3.5 inch lbs.)