Tightening Specifications

TORQUE SPECIFICATION
Stator Shaft x Oil Pump Body 10 Nm (7 ft. lbs.)
Lower Valve Body Cover x Lower Valve Body 6.5 Nm (58 inch lbs.)
Lower Valve Body x Upper Valve Body 6.5 Nm (58 inch lbs.)
Solenoid Valve x Valve Body
M5 x 8 mm bolt 6.5 Nm (58 inch lbs.)
M6 x 10 mm bolt 10 Nm (7 ft. lbs.)
Ring Gear x Differential Case 97 Nm (71 ft. lbs.)
Counter Driven Gear Lock Nut 180 Nm (166 ft. lbs.)
Transaxle Rear Cover 10 Nm (7 ft. lbs.)
Transaxle Housing 30 Nm (22 ft. lbs.)
Oil Pump x Transaxle Case 25 Nm (18 ft. lbs.)
Valve Body x Transaxle Case 10 Nm (7 ft. lbs.)
Manual Detent Spring x Transaxle Case 10 Nm (7 ft. lbs.)
Oil Pan x Transaxle Case 5.2 Nm (47 inch lbs.)
Throttle Cable Retaining Bolt 5.5 Nm (49 inch lbs.)
Solenoid Wire Retaining Bolt 5.5 Nm (49 inch lbs.)
Transaxle Case x Union 30 Nm (22 ft. lbs.)
Park/Neutral Position Switch 5.4 Nm (47 inch lbs.)