Overhaul

DISASSEMBLY

1. REMOVE NO. 1 HEATER TO REGISTER DUCT
2. REMOVE NO. 3 HEATER TO REGISTER DUCT
3. REMOVE CENTER HEATER TO REGISTER DUCT
4. REMOVE FRONT PASSENGER AIRBAG ASSEMBLY AND FRONT PASSENGER AIRBAG DOOR




a. Disconnect the connector.
b. Remove the 2 screws and airbag assembly.

Torque: A bolt: 20 N.m (204 kgf.cm, 15 ft.lbf)

c. Remove the 3 bolts and airbag door.

Torque: B bolt: 5.0 N.m (50 kgf.cm, 44 in.lbf)

5. REMOVE DEFROSTER NOZZLE ASSEMBLY
6. REMOVE NO. 1 LOWER MOUNTING BRACKET
7. REMOVE NO. 1 REGISTER
8. REMOVE LOWER FINISH LH PANEL
9. REMOVE CENTER BRACKET
10. REMOVE DEFROSTER DUCT BRACKET
11. REMOVE INSTRUMENT PANEL WIRE HARNESS

REASSEMBLY
Reassembly is In the reverse order of disassembly.