Reassembly

REASSEMBLY

HINT:
- Thoroughly clean all parts to be assembled.
- Before installing the parts, apply fresh engine oil to all sliding and rotating surfaces.
- Replace all gaskets and oil seals with new ones.

1. INSTALL VALVES





a. Using SST, push in a new oil seal.
SST 09201-401020





HINT: The intake valve oil seal is brown and the exhaust valve oil seal is black.

b. Install these parts:
- Valve
- Spring seat
- Valve spring
- Spring retainer





c. Using SST, compress the valve spring and place the keepers around the valve stem.
SST 09202-70020 (09202-00010)





d. Using a plastic-faced hammer, lightly tap the valve stem tip to assure proper fit.
2. INSTALL VALVE LIFTERS AND SHIMS
a. Install the valve lifter and shim.
b. Check that the valve lifter rotates smoothly by hand.