Second Brake

SECOND BRAKE

COMPONENTS





2ND BRAKE PISTON DISASSEMBLY
REMOVE 2ND BRAKE PISTON





a. Blow compressed air into the oil hole to remove the piston.





b. Using a screwdriver, remove the 2 O-rings from the piston.





2ND BRAKE COMPONENT INSPECTION
INSPECT DISCS, PLATES AND FLANGE
Check if the sliding surfaces of the discs, plates and flange are worn or burnt If necessary, replace them.

HINT: If the lining of the disc is peeling off or discolored, or even if a part of the printed numbers are defaced, replace all discs.

2ND BRAKE PISTON ASSEMBLY
INSTALL PISTON





a. Coat new 2 O-rings with ATF.
b. Install the 2 O-rings on the piston.





c. Press the piston into the drum, being careful not to damage the O-rings.