Sliding Door, Power - Cable Adjustment: Overview

BODY
BO005-00
REVISED

Title:
POWER SLIDING DOOR CABLE ADJUSTMENT PROCEDURE

Models:
'99 - '00 Sienna

July 28, 2000

Introduction
Sliding door cable adjustment may be necessary if the Sienna power sliding door becomes inoperative, intermiffently inoperative, does not close properly, or returns to an open position when trying to close the door using the power switch or remote control.

NOTE:
The sliding door can always be operated manually, with the main power switch turned off.

The following information provides helpful details on the power sliding door cable adjustment procedure outlined in the Repair Manual.

Applicable Vehicle:
^ 1999 through 2000 model year Sienna vehicles.





Applicable Warranty *:
This repair is covered under the Toyota Basic Warranty. This warranty is in effect for 36 months or 36,000 miles, whichever occurs first, from the vehicle's in-service date.

* Warranty application is limited to correction of a problem based upon a customer's specific complaint.