Canada - Seat (No. 2 Rear-Most) - Difficult to Remove or Instal

Bulletin
1011

Issue Date
2001-09-19

Reference
BC-01-024

Model
Sienna

Year Range
1998 ~ 2000

Market
Canada

Component
BC

Subject:
REAR SEAT ADJUSTER BINDING

Some customers may complain about the rear No. 2 (rear most) seat being difficult to remove or install into the vehicle. The seat adjuster legs were modified to prevent bending or binding of the sensor arm in the seat leg assemblies. Replacing the seat leg assembly will remedy this condition.

APPLICABLE VEHICLES:
1998 - 2000 model year Sienna vehicles.





PARTS INFORMATION:

REPAIR PROCEDURE:





Please refer to the Sienna Repair Manual, for rear seat disassembly instructions.
- Replace damaged leg assembly with service parts.





REPAIR TIME:

NOTE:
Issue of this Technical Service Bulletin is to ensure that proper repair information is available. IT DOES NOT CONSTITUTE AN AUTHORIZATION FOR REPAIR. Normal provisions of the formal warranty policy, as applicable, will apply.