Air Conditioning Control

DISASSEMBLY

1. PULL OUT HEATER CONTROL KNOBS

2. REMOVE GRAPHIC PLATE
Release the 4 claws and remove the graphic plate.

3. REMOVE A/C SWITCH
Release the 4 claws and remove the A/C switch from the heater control name plate.

4. REMOVE BLOWER SWITCH
a. Pull out the 2 bulbs.
b. Disconnect the 2 bulb holders.
c. Remove the 2 screws and blower switch.

5. REMOVE HEATER CONTROL CABLES
a. Using a screwdriver, open the claw of the cable clamp and disconnect the outer cable.

HINT: Tape the screwdriver tip before use.

b. Remove the inner cable from the A/C control assembly.

REASSEMBLY
Reassembly is in the reverse order of disassembly