Seals and Gaskets: Service and Repair
ON-VEHICLE REPAIR1. REMOVE DRIVE SHAFT
2. REMOVE SIDE GEAR SHAFT OIL SEAL
Using SST, pull out the oil seal.
SST 09308-00010
3. INSTALL LEFT SIDE GEAR SHAFT OIL SEAL
a) Using SST and a hammer, drive in a new oil seal.
SST 09223-15020, 09351-32014 (09351-32130)
Oil seal depth: 0 ± 0.5 mm (0 ± 0.02 inch)
b) Coat the lip of the oil seal with MP grease.
4. INSTALL RIGHT SIDE GEAR SHAFT OIL SEAL
a) Using SST and hammer, drive in a new oil seal.
SST 09316-60011 (09316-00011)
Oil seal depth: 0 ± 0.5 mm (0 ± 0.02 inch)
b) Coat the lip of the oil seal with MP grease.
5. INSTALL DRIVE SHAFT
6. CHECK ATF AND CHECK FLUID LEVEL