Rear Seat

REMOVAL

1. REMOVE BACK PANEL UPPER GARNISH AND BACK PANEL TRIM




a. Using a screwdriver, remove the garnish.

HINT: Tape the screwdriver tip before use.

b. Remove the 3 bolts and trim.




2. REMOVE BACK PANEL LOWER GARNISH
Using a screwdriver, remove the garnish.

HINT: Tape the screwdriver tip before use.

3. REMOVE REAR SEAT CUSHIONS
Remove the 4 bolts and rear seat cushions.

4. REMOVE SEAT TURN TABLE

INSTALLATION

1. INSTALL SEAT TURN TABLE




2. INSTALL REAR SEAT CUSHIONS
Install the rear seat cushions with the 4 bolts.

Torque: 9.8 N.m (100 kgf.cm, 7 ft.lbf)

3. INSTALL BACK PANEL LOWER GARNISH
Install the back panel lower garnish to the body.




4. INSTALL BACK PANEL UPPER GARNISH AND BACK PANEL TRIM
a. Install the trim with the 3 bolts.

Torque: 9.8 N.m (100 kgf.cm, 7 ft.lbf)

b. Install the garnish to the body.