Manual Shifting Test

MANUAL SHIFTING TEST

HINT: By this test, it can be determined whether the trouble is within the electrical circuit or is a mechanical problem in the transmission.

a. Disconnect the solenoid wire.




b. Inspect the manual driving operation.
Check that the shift and gear positions correspond with the table.

HINT: If the L, 2 and D position gear positions are difficult to distinguish, do the following road test.
- While driving, shift through the L, 2 and D positions. Check that the gear change corresponds to the shift position.
- If any abnormality is found in the above test, the problem is in the transmission itself.

c. Connect the solenoid wire.
d. Delete the DTC.