Engine - General Maintenance
INSPECTIONHINT: Inspect these items when the engine is cold.
1. REPLACE TIMING BELT
2. INSPECT DRIVE BELTS
3. REPLACE SPARK PLUGS
4. INSPECT AIR FILTER
a. Visually check that the air cleaner element is not excessively dirty, damaged or oily.
HINT: Oiliness may indicate a stuck PCV valve.
If necessary, replace the air cleaner element.
b. Clean the element with compressed air.
First blow from back side thoroughly, then blow OFF the front side of the element.
5. REPLACE AIR FILTER
Replace the used air cleaner element with a new one.
6. REPLACE ENGINE OIL AND OIL FILTER
7. REPLACE ENGINE COOLANT
8. INSPECT CHARCOAL CANISTER
9. REPLACE GASKET IN FUEL TANK CAP
10. INSPECT FUEL LINES AND CONNECTIONS
11. INSPECT EXHAUST PIPES AND MOUNTINGS
12. REPLACE A/F SENSOR (California Spec.)
13. REPLACE HEATED OXYGEN SENSOR