Disassembly and Reassembly

DISASSEMBLY
1. CHECK HUB BEARINGS
Clean the bearings and outer races and inspect them for wear or damage.





2. REMOVE BEARING OUTER RACES
Using SST, a brass bar and hammer, remove the inside and out side of the bearing outer races.
SST 09527-17011

NOTICE: Be careful not to damage the ABS speed sensor rotor.

REASSEMBLY
INSTALL NEW BEARING OUTER RACES





a. Using SST and a press, install a new inside of the bearing outer race.
SST 09527-17011, 09950-60010 (09951-00640), 09950-70010 (09951-07150)
b. Using SST and a press, install a new outside of the bearing race.
SST 09527-17011, 09950-60010 (09951-00490), 09950-70010 (09951-07150)

NOTICE: Be careful not to damage the ABS speed sensor rotor.