Problem Symptom Confirmation (Road Test)

a. Inspect the SET switch.
1. Push the main switch ON.
2. Drive at a desired speed [40 km/h (25 mph) or higher].
3. Press the control switch to the SET/COAST.
4. After releasing the switch, check that the vehicle cruises at the desired speed.




b. Inspect the ACCEL switch.
1. Push the main switch ON.
2. Drive at a desired speed [40 km/h (25 mph) or higher].
3. Check that the vehicle speed increases while the control switch is turned to RES/ACC, and that the vehicle cruises at the set speed when the switch is released.
4. Momentarily press the control switch upward in the RES/ACC direction and then immediately release it. Check that the vehicle speed increases by about 1.5 km/h (Tap-up function).




c. Inspect the COAST switch.
1. Push the main switch ON.
2. Drive at a desired speed [40 km/h (25 mph) or higher].
3. Check that the vehicle speed decreases while the control switch is turned to SET/COAST, and the vehicle cruises at the set speed when the switch is released.
4. Momentarily press the control switch is turned to SET/COAST, and then immediately release it. Check that the vehicle speed decreases by about 1.5 km/h (Tap~down function).




d. Inspect the CANCEL switch.
1. Push the main switch ON.
2. Drive at a desired speed [40 km/h (25 mph) or higher].
3. When operating one of the followings, check that the cruise control system is cancelled and that the normal driving mode is reset.
- Depress the brake pedal
- Shift to except D position (A/T)
- Push the main switch OFF Pull the cruise control switch to CANCEL




e. Inspect the RESUME switch.
1. Push the main switch ON.
2. Drive at a desired speed [40 km/h (25 mph) or higher].

3. When operating one of the followings, check that the cruise control system is cancelled and that the normal driving mode is reset.
- Depress the brake pedal
- Shift to except D position (A/T)
- Pull the cruise control switch to CANCEL

4. After the control switch is turned to RES/ACC at the driving speed of more than 40 km/h (25 mph), check that the vehicle restores the speed prior to the cancellation.