Engine Oil: Testing and Inspection

INSPECTION





1. CHECK ENGINE OIL QUALITY
Check the oil for deterioration, entry of water, discoloring or thinning.
If the quality is visibly poor, replace the oil
Oil grade: Use API SJ, Energy-Conserving or ILSAC multi-grade engine oil. SAE 5W-30 is the best choice for your vehicle, for good fuel economy, and good starting in cold weather.
2. CHECK ENGINE OIL LEVEL
The oil level should be between the "L" and "F" marks on the dipstick
If low, check for leakage and add oil up to the "F" mark

NOTICE: Do not fill with engine oil above the "F" mark.

3. REMOVE ENGINE UNDER COVER





4. REMOVE OIL PRESSURE SWITCH
5. INSTALL OIL PRESSURE GAUGE
6. WARM UP ENGINE
Allow the engine to warm up to normal operating temperature
7. CHECK OIL PRESSURE





Oil pressure:

8. REMOVE OIL PRESSURE GAUGE





9. REINSTALL OIL PRESSURE SWITCH
a. Apply adhesive to 2 or 3 threads of the oil pressure switch
Adhesive: Part No. 08833-00080, THREE BOND 1344, LOCTITE 242 or equivalent
b. Reinstall the oil pressure switch.
10. START ENGINE, AND CHECK FOR ENGINE OIL LEAKS
11. REINSTALL ENGINE UNDER COVER