Drivetrain - Propeller Shaft Joint Grease/Fittings
DRIVELINE & DIFFERENTIALDL001-99
Title:
PROPELLER SHAFT JOINT GREASE
Models:
'96-'99 4Runner 4WD, '95-'99 Tacoma 4WD,
'98-'99 PreRunner, & '00 Tundra 4WD
August 27, 1999
Introduction
This Service Bulletin provides the location of the grease fittings for the propeller shaft joints as well as the type of grease to use with each fitting location. See the Scheduled Maintenance Guide of each vehicle for recommended lubrication intervals.
Applicable Vehicles
^ 1996-1999 4Runner 4WD, 1995-1999 Tacoma 4WD, 1998-1999 PreRunnner, & 2000 Tundra 4WD
Warranty Information
Procedure for 4Runner
Use a grease gun to apply multi-purpose grease to the No. 1, 2, 3, 7 and 8 grease fittings. Apply molybdenum disulfide lithium base chassis grease, NLGI No. 2, to the No. 4, 5 and 6 grease fittings (double cardan joint).
Procedure for Tacoma & PreRunner
Use a grease gun to apply multi-purpose grease to the No. 1, 2, 3, 7, 8, 9, 13 and 14 grease fittings. Apply molybdenum disulfide lithium base chassis grease, NLGI No. 2, to the No. 4, 5, 6, 10, 11 and 12 grease fittings (double cardan joint).
Procedure for Tundra
Use a grease gun to apply multi-purpose grease to the No. 1, 2, 3, 7 and the slip yoke grease fittings. Apply molybdenum disulfide lithium base chassis grease, NLGI No. 2, to the No. 4, 5, and 6 grease fittings (double cardan joint).