Canada - Brakes - Vibration From Rear

Bulletin
0942

Issue Date
2001-03-28

Reference
BR-01-002

Model
Tundra

Year Range
2000, 2001

Market
Canada

Component
BR

Subject:
REAR BRAKE VIBRATION

New shoe adjuster assemblies have been developed to reduce the possibility of rear brake vibration on 200 and 2001 model year Tundra vehicles. The number of teeth on the shoe adjuster assembly has been reduced from 30 to 26 teeth.

APPLICABLE VEHICLES:
2000 - 2001 model year Tundra vehicles.





PRODUCTION CHANGE INFORMATION:





PART NUMBER INFORMATION:

REPAIR PROCEDURE:

1. Grind rear brake drums with brake lathe to within serviceable limits.
2. If the drums are unserviceable or above maximum inside diameter, replace the drums.
3. If there is uneven wear on the lining, replace the left and right brake shoes.
4. Replace the Shoe Adjuster Assemblies.
5. Adjust the parking brake to specifications.
6. Reinstall the rear wheels, and torque wheel nuts to:
Torque: 113 N-m (1,150 kgf-cm, 83 ft-lbf)

7. Road test.





REPAIR TIME:

Note:
Labour will be adjusted if claim is for any labour operation duplication or overlap.

NOTE:
Issue of this Technical Service Bulletin is to ensure that proper repair information is available. IT DOES NOT CONSTITUTE AN AUTHORIZATION FOR REPAIR. Normal provisions of the formal warranty policy, as applicable, will apply.