Removal and Installation

REMOVAL
1. REMOVE FRONT WHEEL
Remove the front wheel and temporarily fasten the disc with hub nuts.
Torque: 103 Nm (1,050 kgf-cm, 76 ft. lbs.)





2. DISCONNECT BRAKE LINE
Using SST, disconnect the brake line. Use a container to catch the brake fluid.
SST 09023-00100
Torque: 15 Nm (155 kgf-cm, 11 ft. lbs.)





3. REMOVE CALIPER
Remove the 2 mounting bolts and caliper.
Torque: 123 Nm (1,250 kgf-cm, 90 ft. lbs.)
4. REMOVE CLIP, 2 PINS, ANTI-RATTLE SPRING AND 2 PADS WITH 4 ANTI-SQUEAL SHIMS

INSTALLATION
Installation is in the reverse order of removal.

HINT:
- After installation, fill the brake reservoir with brake fluid and bleed brake system.
- Check for leaks.