Tightening Specifications

Overdrive support x Transmission case 25 Nm (19 ft. lbs.)
Oil pan x Transmission case 7.4 Nm (65 inch lbs.)
Transmission housing 14 mm bolt 34 Nm (25 ft. lbs.)
Transmission housing 17 mm bolt 57 Nm (42 ft. lbs.)
Union 29 Nm (22 ft. lbs.)
Transmission case x Transfer adaptor 34 Nm (25 ft. lbs.)
Transfer adaptor x Transfer 36 Nm (27 ft. lbs.)
Park/Neutral position switch 6.9 Nm (61 inch lbs.)
Park/Neutral position switch adjusting bolt 13 Nm (9 ft. lbs.)
Vehicle speed sensor 16 Nm (12 ft. lbs.)
Control Shaft Lever 16 N.m (160 kgf-cm, 12 ft.lb.)
Dynamic Damper 37 N.m (380 kgf-cm, 27 ft.lb.)