TMC Made

INSPECTION

VEHICLE NOT INVOLVED IN COLLISION
a. Do a diagnostic system check.*
b. Do a visual check which includes the following items with the seatback assembly installed in the vehicle.




Check that there are no cuts or frayed seams and outside of seatback cover.




VEHICLE INVOLVED IN COLLISION AND AIRBAG IS NOT DEPLOYED
a. Do a diagnostic system check.*
b. Do a visual check which includes the following items with the seatback assembly removed from the vehicle.
- Check cuts and cracks of the side airbag assembly.
- Check cuts and cracks in wire harnesses, and chipping in connectors.

CAUTION: For removal and installation of the seatback assembly. Be sure to follow the correct procedure

VEHICLE INVOLVED IN COLLISION AND AIRBAG IS DEPLOYED
a. Do a diagnostic system check.*
b. Do a visual check which includes the following items with the seatback assembly removed from the vehicle.
- Check the seatback installation part of the seat adjuster.
- Check the damage to the connector and wire harness.

HINT: If the seat adjuster is deformed, never repair it. Always replace it with a new one.

* Refer to SRS Warning Light Check, and How to Display and Read Diagnostic Trouble Codes.

Displaying & Reading Trouble Codes