Overhaul
DISASSEMBLY1. REMOVE SUNSHADE STOPPERS
Torque: 2.0 N.m (20 kgf.cm, 17 in.lbf)
2. REMOVE NO. 1 AND NO. 2 SUNSHADE TRIMS
3. REMOVE FRONT HOUSING FRAME
Remove the 6 screws and front housing frame as shown in the illustration.
Torque: 2.0 N.m (20 kgf.cm, 17 in.lbf)
4. REMOVE REAR ROOF DRIP CANNEL
5. REMOVE LH AND RH ROOF DRIP CHANNEL
6. REMOVE CABLE GUIDE CASING
Torque: 2.0 N.m (20 kgf.cm, 17 in.lbf)
7. REMOVE DRIVE CABLE
a. Remove the screw.
b. Slide the drive cable rearward, then remove it.
c. Employ the same manner described above to the other side.
HINT: At the time of reassembly, please refer to the following items.
- Adjust the drive cable to a closed and tilted down position.
- Slide the cable forward or backward to align the 2 marks as shown in the illustration.
REASSEMBLY
Reassembly is in the reverse order of disassembly.