Service Hints
Electronically Controlled Transmission and A/T IndicatorE1 ELECTRONICALLY CONTROLLED TRANSMISSION SOLENOID
2 - 8 : 5.1 - 5.5 Ohm
3 - 9 : 3.5 - 3.9 Ohm
4 - 10 : 5.1 - 5.5 Ohm
5, 6, 11, 12 - GROUND : 11 - 15 Ohm
V2 VEHICLE SPEED SENSOR (ELECTRONICALLY CONTROLLED TRANSMISSION)
1 - 2 : 560 - 680 Ohm
O1 O/D DIRECT CLUTCH SPEED SENSOR
1 - 2 : 560 - 680 Ohm
E3 (B), E5 (D) ENGINE CONTROL MODULE
BATT - E1 : Always approx. 12 volts
+ B - E1 : Approx. 12 volts with ignition SW ON or ST position
MREL - E1 : Approx. 12 volts with ignition SW ON or ST position
P1 A/T INDICATOR LIGHT SW [PARK I NEUTRAL POSITION SW]
3 - 1 : Closed with shift lever in P position.
3 - 2 : Closed with shift lever in R position.
3 - 5 : Closed with shift lever in N position.
3 - 7 : Closed with shift lever in D position.
3 - 4 : Closed with shift lever in 2 position.
3 - 8 : Closed with shift lever in L position.