Service Hints
C3 CRUISE CONTROL ACTUATOR3 - 4 : Approx. 38.5 Ohms
C16 CRUISE CONTROL SW [COMB. SW]
5 - 3 : Continuity with the CRUISE SW on
4 - 3 : Approx. 418 Ohms with the CANCEL SW on
Approx. 68 Ohms with the RESUME/ACCEL SW on
Approx. 198 Ohms with the SET/COAST SW on
C19 CRUISE CONTROL ECU
9 - GROUND : 10 - 16 volts with the ignition SW at ON position
12 - GROUND : 4 pulses with 1 rotation of the rotor shaft
10 - GROUND : Approx. 418 Ohms with the CANCEL SW on in the control SW
Approx. 198 Ohms with the SET/COAST SW on in the control SW
Approx. 68 Ohms with the RESUME/ACCEL SW on in the control SW
16 - GROUND : Always continuity