Differential, Automatic Transaxle

SERVICE SPECIFICATIONS
Counter Drive Gear Preload:
New bearing 0.3 - 0.7 Nm (3.1 - 7.1 kgf-cm, 2.1 - 6.1 inch lbs.)
Reused bearing 0.3 - 0.4 Nm (1.7 - 4.1 kgf-cm, 1.7 - 3.5 inch lbs.)
Side Bearing Preload (At Starting):
New Bearing 0.8 - 1.4 Nm (6.9 - 12.2 inch lbs.)
Reused Bearing 0.4 - 0.7 Nm (3.5 - 6.1 inch lbs.)
Pinion To Side Gear Backlash 0.05 - 0.20 mm (0.0020 - 0.0079 inch)
Side Gear Thrust Washer Thickness:
0.95 mm (0.0374 inch)
1.00 mm (0.0394 inch)
1.05 mm (0.0413 inch)
1.15 mm (0.0453 inch)
1.20 mm (0.0472 inch)
Side Bearing Adjusting Shim Thickness:
2.00 mm (0.0787 inch)
2.05 mm (0.0807 inch)
2.10 mm (0.0827 inch)
2.15 mm (0.0846 inch)
2.20 mm (0.0866 inch)
2.25 mm (0.0886 inch)
2.30 mm (0.0906 inch)
2.35 mm (0.0925 inch)
2.40 mm (0.0945 inch)
2.45 mm (0.0965 inch)
2.50 mm (0.0984 inch)
2.55 mm (0.1004 inch)
2.60 mm (0.1024 inch)
2.65 mm (0.1043 inch)
2.70 mm (0.1063 inch)
2.75 mm (0.1083 inch)
2.80 mm (0.1102 inch)
2.85 mm (0.1122 inch)
2.90 mm (0.1142 inch)

TORQUE SPECIFICATIONS
Ring Gear X Differential Case 97 Nm (985 kgf-cm, 71 ft. lbs.)
Counter Driven Gear Lock Nut 180 Nm (1,835 kgf-cm, 166 ft. lbs.)