Rear Bumper: Service and Repair

REPLACEMENT

Rear Bumper Cover:

HINT: See the component's drawing of rear bumper cover.

1. REMOVE SPARE WHEEL COVER TRAY
2. REMOVE LUGGAGE COMPARTMENT TRAY
3. REMOVE REAR FLOOR FINISH PLATE




a. Remove the 4 clips.
b. Using a screwdriver, remove the rear floor finish plate.

HINT: Tape the screwdriver tip before use.

4. REMOVE QUARTER PANEL MUDGUARD SUB-ASSEMBLY REAR RH(W/ MUDGUARD)




a. Remove the 4 screws and quarter panel mudguard rear.

5. REMOVE QUARTER PANEL MUDGUARD SUB-ASSEMBLY REAR LH(W/ MUDGUARD)
6. REMOVE REAR BUMPER COVER




a. Remove the 4 clips.
b. Remove the 4 screws and 4 nuts and rear bumper cover.