Front Seat
REMOVALREMOVE FRONT SEAT
Remove the 4 bolts and front seat.
NOTE: Be careful not to damage the body.
INSTALLATION
INSTALL FRONT SEAT
a. Slide the front seat to the frontmost position.
NOTE: Make sure that seat adjuster locks.
b. Without holding the seat track adjusting handle, mount the seat to the vehicle.
HINT: If holding the seat track adjusting handle, the adjusted frontmost position will slip off.
c. Tighten the bolts on the rear side temporarily, tighten them completely starting from the bolt on the inner side.
Torque: 37 N.m (375 kgf.cm, 27 ft.lbf)
d. Slide the seat to the rearmost position to install the bolts on the front side.
Torque: 37 N.m (375 kgf.cm, 27 ft.lbf)