Rear Wheel Alignment

NOTICE: For Zero Point Calibration information, please refer to: TSB T-SB-0020-8 (3/25/08).

INSPECTION
1. MEASURE VEHICLE HEIGHT

NOTICE: Before inspecting the wheel alignment, adjust the vehicle height to the specification.





2. INSPECT CAMBER

HINT: Camber is not adjustable. If the measurement is not within the specifications, inspect the suspension parts for damaged and/ or worn-out and replace them if necessary.

Measuring Point Reference:

3. INSPECT TOE-IN
If the toe-in is not within the specification, inspect and replace the suspension parts as necessary.