Blower Motor Linear Controller

BLOWER MOTOR LINEAR CONTROLLER (AUTO A/C)

INSPECTION

1. REMOVE LOWER NO.2 FINISH PANEL




2. REMOVE BLOWER MOTOR LINEAR CONTROLLER
a. Disconnect the connector.
b. Remove the 2 screws and blower motor linear controller.

3. INSPECT BLOWER MOTOR LINEAR CONTROLLER
If resistance is not as specified, replace the blower resistor.

4. INSTALL BLOWER MOTOR LINEAR CONTROLLER
a. Install the blower motor linear controller with the 2 screws.
b. Connect the connector.

5. INSTALL LOWER NO.2 FINISH PANEL